^^&&^^

Edit File: dpkg-depcheck

#!/usr/bin/perl

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <https://www.gnu.org/licenses/>.

use strict;
use warnings;
use 5.006_000;    # our() commands
use Cwd;
use File::Basename;
use Getopt::Long;

use Devscripts::Set;
use Devscripts::Packages;
use Devscripts::PackageDeps;

# Function prototypes
sub process_features ($$);
sub getusedfiles (@);
sub filterfiles (@);

# Global options
our %opts;

# A list of files that do not belong to a Debian package but are known
# to never create a dependency
our @known_files = (
    "/etc/ld.so.cache",   "/etc/dpkg/shlibs.default",
    "/etc/dpkg/dpkg.cfg", "/etc/devscripts.conf"
);

# This will be given information about features later on
our (%feature, %default_feature);

my $progname = basename($0);
my $modified_conf_msg;

sub usage () {
    my @ed = ("disabled", "enabled");
    print <<"EOF";
Usage:
  $progname [options] <command>
Run <command> and then output packages used to do this.
Options:
  Which packages to report:
    -a, --all              Report all packages used to run <command>
    -b, --build-depends    Do not report build-essential or essential packages
                           used or any of their (direct or indirect)
                           dependencies
    -d, --ignore-dev-deps  Do not show packages used which are direct
                           dependencies of -dev packages used
    -m, --min-deps         Output a minimal set of packages needed, taking
                           into account direct dependencies
    -m implies -d and both imply -b; -a gives additional dependency information
    if used in conjunction with -b, -d or -m

-C, --C-locale           Run command with C locale
  --no-C-locale            Don\'t change locale
  -l, --list-files         Report list of files used in each package
  --no-list-files          Do not report list of files used in each package
  -o, --output=FILE        Output diagnostic to FILE instead of stdout
  -O, --strace-output=FILE Write strace output to FILE when tracing <command>
                           instead of a temporary file
  -I, --strace-input=FILE  Get strace output from FILE instead of tracing
                           <command>; strace must be run with -f -q for this
                           to work

-f, --features=LIST      Enable or disabled features given in
                           comma-separated LIST as follows:
    +feature or feature      enable feature
    -feature                 disable feature

Known features and default setting:
      warn-local             ($ed[$default_feature{'warn-local'}]) warn if files in /usr/local are used
      discard-check-version  ($ed[$default_feature{'discard-check-version'}]) discard execve with only
                             --version argument; this works around some
                             configure scripts that check for binaries they
                             don\'t use
      trace-local            ($ed[$default_feature{'trace-local'}]) also try to identify file
                             accesses in /usr/local
      catch-alternatives     ($ed[$default_feature{'catch-alternatives'}]) catch access to alternatives
      discard-sgml-catalogs  ($ed[$default_feature{'discard-sgml-catalogs'}]) discard access to SGML
                             catalogs; some SGML tools read all the
                             registered catalogs at startup.

--no-conf, --noconf        Don\'t read devscripts config files;
                             must be the first option given
  -h, --help                 Display this help and exit
  -v, --version              Output version information and exit

Default settings modified by devscripts configuration files:
$modified_conf_msg
EOF
}

sub version () {
    print <<'EOF';
This is $progname, from the Debian devscripts package, version 2.23.7ubuntu0.2
Copyright Bill Allombert <ballombe@debian.org> 2001.
Modifications copyright 2002, 2003 Julian Gilbey <jdg@debian.org>
This program comes with ABSOLUTELY NO WARRANTY.
You are free to redistribute this code under the terms of the
GNU General Public License, version 2 or later.
EOF
}

# Main program

# Features:
# This are heuristics used to speed up the process.
# Since they may be considered as "kludges" or worse "bugs"
# by some, they can be deactivated
# 0 disabled by default, 1 enabled by default.
%feature = (
    "warn-local"            => 1,
    "discard-check-version" => 1,
    "trace-local"           => 0,
    "catch-alternatives"    => 1,
    "discard-sgml-catalogs" => 1,
);
%default_feature = %feature;

# First process configuration file options, then check for command-line
# options.  This is pretty much boilerplate.

if (@ARGV and $ARGV[0] =~ /^--no-?conf$/) {
    $modified_conf_msg = "  (no configuration files read)";
    shift;
} else {
    my @config_files   = ('/etc/devscripts.conf', '~/.devscripts');
    my %config_vars    = ('DPKG_DEPCHECK_OPTIONS' => '',);
    my %config_default = %config_vars;

my $shell_cmd;
    # Set defaults
    foreach my $var (keys %config_vars) {
        $shell_cmd .= qq[$var="$config_vars{$var}";\n];
    }
    $shell_cmd .= 'for file in ' . join(" ", @config_files) . "; do\n";
    $shell_cmd .= '[ -f $file ] && . $file; done;' . "\n";
    # Read back values
    foreach my $var (keys %config_vars) { $shell_cmd .= "echo \$$var;\n" }
    my $shell_out = `/bin/bash -c '$shell_cmd'`;
    @config_vars{ keys %config_vars } = split /\n/, $shell_out, -1;

foreach my $var (sort keys %config_vars) {
        if ($config_vars{$var} ne $config_default{$var}) {
            $modified_conf_msg .= "  $var=$config_vars{$var}\n";
        }
    }
    $modified_conf_msg ||= "  (none)\n";
    chomp $modified_conf_msg;

if ($config_vars{'DPKG_DEPCHECK_OPTIONS'} ne '') {
        unshift @ARGV, split(' ', $config_vars{'DPKG_DEPCHECK_OPTIONS'});
    }
}

# Default option:
$opts{"pkgs"}    = 'all';
$opts{"allpkgs"} = 0;

Getopt::Long::Configure('bundling', 'require_order');
GetOptions(
    "h|help"                     => sub { usage();   exit; },
    "v|version"                  => sub { version(); exit; },
    "a|all"                      => sub { $opts{"allpkgs"} = 1; },
    "b|build-depends"            => sub { $opts{"pkgs"}    = 'build'; },
    "d|ignore-dev-deps"          => sub { $opts{"pkgs"}    = 'dev'; },
    "m|min-deps"                 => sub { $opts{"pkgs"}    = 'min'; },
    "C|C-locale"                 => \$opts{"C"},
    "no-C-locale|noC-locale"     => sub { $opts{"C"} = 0; },
    "l|list-files"               => \$opts{"l"},
    "no-list-files|nolist-files" => sub { $opts{"l"} = 0; },
    "o|output=s"                 => \$opts{"o"},
    "O|strace-output=s"          => \$opts{"strace-output"},
    "I|strace-input=s"           => \$opts{"strace-input"},
    "f|features=s"               => \&process_features,
    "no-conf"                    => \$opts{"noconf"},
    "noconf"                     => \$opts{"noconf"},
) or do { usage; exit 1; };

if ($opts{"noconf"}) {
    die
"$progname: --no-conf is only acceptable as the first command-line option!\n";
}

if ($opts{"pkgs"} eq 'all') {
    $opts{"allpkgs"} = 0;
} else {
    # We don't initialise the packages database before doing this check,
    # as that takes quite some time
    unless (system('dpkg -L build-essential >/dev/null 2>&1') >> 8 == 0) {
        die
"You must have the build-essential package installed or use the --all option\n";
    }
}

@ARGV > 0
  or $opts{"strace-input"}
  or die
  "You need to specify a command!  Run $progname --help for more info\n";

# Run the command and trace it to see what's going on
my @usedfiles = getusedfiles(@ARGV);

if ($opts{"o"}) {
    $opts{"o"} =~ s%^(\s)%./$1%;
    open STDOUT, "> $opts{'o'}"
      or warn
      "Cannot open $opts{'o'} for writing: $!\nTrying to use stdout instead\n";
} else {
    # Visual space
    print "\n\n";
    print '-' x 70, "\n";
}

# Get each file once only, and drop any we are not interested in.
# Also, expand all symlinks so we get full pathnames of the real file accessed.
@usedfiles = filterfiles(@usedfiles);

# Forget about the few files we are expecting to see but can ignore
@usedfiles = SetMinus(\@usedfiles, \@known_files);

# For a message at the end
my $number_files_used = scalar @usedfiles;

# Initialise the packages database unless --all is given
my $packagedeps;

# @used_ess_files will contain those files used which are in essential packages
my @used_ess_files;

# Exclude essential and build-essential packages?
if ($opts{"pkgs"} ne 'all') {
    $packagedeps = Devscripts::PackageDeps->fromStatus();
    my @essential = PackagesMatch('^Essential: yes$');
    my @essential_packages
      = $packagedeps->full_dependencies('build-essential', @essential);
    my @essential_files = PackagesToFiles(@essential_packages);
    @used_ess_files = SetInter(\@usedfiles, \@essential_files);
    @usedfiles      = SetMinus(\@usedfiles, \@used_ess_files);
}

# Now let's find out which packages are used...
my @ess_packages = FilesToPackages(@used_ess_files);
my @packages     = FilesToPackages(@usedfiles);
my %dep_packages = ();    # packages which are depended upon by others

# ... and remove their files from the filelist
if ($opts{"l"}) {
    # Have to do it slowly :-(
    if ($opts{"allpkgs"}) {
        print
"Files used in each of the needed build-essential or essential packages:\n";
        foreach my $pkg (sort @ess_packages) {
            my @pkgfiles = PackagesToFiles($pkg);
            print "Files used in (build-)essential package $pkg:\n  ",
              join("\n  ", SetInter(\@used_ess_files, \@pkgfiles)), "\n";
        }
        print "\n";
    }
    print "Files used in each of the needed packages:\n";
    foreach my $pkg (sort @packages) {
        my @pkgfiles = PackagesToFiles($pkg);
        print "Files used in package $pkg:\n  ",
          join("\n  ", SetInter(\@usedfiles, \@pkgfiles)), "\n";
        # We take care to note any files used which
        # do not appear in any package
        @usedfiles = SetMinus(\@usedfiles, \@pkgfiles);
    }
    print "\n";
} else {
    # We take care to note any files used which
    # do not appear in any package
    my @pkgfiles = PackagesToFiles(@packages);
    @usedfiles = SetMinus(\@usedfiles, \@pkgfiles);
}

if ($opts{"pkgs"} eq 'dev') {
    # We also remove any direct dependencies of '-dev' packages
    my %pkgs;
    @pkgs{@packages} = (1) x @packages;

foreach my $pkg (@packages) {
        next unless $pkg =~ /-dev$/;
        my @deps = $packagedeps->dependencies($pkg);
        foreach my $dep (@deps) {
            $dep = $$dep[0] if ref $dep;
            if (exists $pkgs{$dep}) {
                $dep_packages{$dep} = $pkg;
                delete $pkgs{$dep};
            }
        }
    }

@packages = keys %pkgs;
} elsif ($opts{"pkgs"} eq 'min') {
    # Do a mindep job on the package list
    my ($packages_ref, $dep_packages_ref)
      = $packagedeps->min_dependencies(@packages);
    @packages     = @$packages_ref;
    %dep_packages = %$dep_packages_ref;
}

print "Summary: $number_files_used files considered.\n" if $opts{"l"};
# Ignore unrecognised /var/... files
@usedfiles = grep !/^\/var\//, @usedfiles;
if (@usedfiles) {
    warn "The following files did not appear to belong to any package:\n";
    warn join("\n", @usedfiles) . "\n";
}

print "Packages ", ($opts{"pkgs"} eq 'all') ? "used" : "needed", ":\n  ";
print join("\n  ", @packages),                                   "\n";

if ($opts{"allpkgs"}) {
    if (@ess_packages) {
        print "\n(Build-)Essential packages used:\n  ";
        print join("\n  ", @ess_packages), "\n";
    } else {
        print "\nNo (Build-)Essential packages used\n";
    }

if (scalar keys %dep_packages) {
        print "\nOther packages used with depending packages listed:\n";
        foreach my $pkg (sort keys %dep_packages) {
            print "  $pkg  <=  $dep_packages{$pkg}\n";
        }
    }
}

exit 0;

### Subroutines

# This sub is handed two arguments: f or feature, and the setting

sub process_features ($$) {
    foreach (split(',', $_[1])) {
        my $state = 1;
        m/^-/ and $state = 0;
        s/^[-+]//;
        if (exists $feature{$_}) {
            $feature{$_} = $state;
        } else {
            die("Unknown feature $_\n");
        }
    }
}

# Get used files.  This runs the requested command (given as parameters
# to this sub) under strace and then parses the output, returning a list
# of all absolute filenames successfully opened or execve'd.

sub getusedfiles (@) {
    my $file;
    if ($opts{"strace-input"}) {
        $file = $opts{"strace-input"};
    } else {
        my $old_locale = $ENV{'LC_ALL'} || undef;
        $file = $opts{"strace-output"}
          || `mktemp --tmpdir dpkg-depcheck.XXXXXXXXXX`;
        chomp $file;
        $file =~ s%^(\s)%./$1%;
        my @strace_cmd = (
            'strace', '-e', 'trace=open,openat,execve', '-f',
            '-q',     '-o', $file,                      @_
        );
        $ENV{'LC_ALL'} = "C" if $opts{"C"};
        system(@strace_cmd);
        $? >> 8 == 0
          or die "Running strace failed (command line:\n@strace_cmd\n";
        if (defined $old_locale) { $ENV{'LC_ALL'} = $old_locale; }
        else                     { delete $ENV{'LC_ALL'}; }
    }

my %openfiles = ();
    open FILE, $file or die "Cannot open $file for reading: $!\n";
    while (<FILE>) {
        # We only consider absolute filenames
        m/^\d+\s+(\w+)$(?:[\w\d_]*, )?\"(\/.*?)\",.*$ = (-?\d+)/ or next;
        my ($syscall, $filename, $status) = ($1, $2, $3);
        if ($syscall eq 'open' || $syscall eq 'openat') {
            next unless $status >= 0;
        } elsif ($syscall eq 'execve') {
            next unless $status == 0;
        } else {
            next;
        }    # unrecognised syscall
        next
          if $feature{"discard-check-version"}
          and m/execve\(\"\Q$filename\E\", \[\"[^\"]+\", "--version"\], /;
        # So it's a real file
        $openfiles{$filename} = 1;
    }

unlink $file unless $opts{"strace-input"} or $opts{"strace-output"};

return keys %openfiles;
}

# Select those files which we are interested in, as determined by the
# user-specified options

sub filterfiles (@) {
    my %files        = ();
    my %local_files  = ();
    my %alternatives = ();
    my $pwd          = cwd();

foreach my $file (@_) {
        next unless -f $file;
        $file = Cwd::abs_path($file);

my @links    = ();
        my $prevlink = '';
        foreach (ListSymlinks($file, $pwd)) {
            if (m%^/(usr|var)/local(/|\z)%) {
                $feature{"warn-local"} and $local_files{$_} = 1;
                unless ($feature{"trace-local"}) {
                    $prevlink = $_;
                    next;
                }
            } elsif ($feature{"discard-sgml-catalogs"}
                and m%^/usr/share/(sgml/.*\.cat|.*/catalog)%) {
                next;
            } elsif ($feature{"catch-alternatives"} and m%^/etc/alternatives/%)
            {
                $alternatives{ "$prevlink --> " . readlink($_) } = 1
                  if $prevlink;
            }
            $prevlink = $_;
            # If it's not in one of these dirs, we skip it
            next unless m%^/(bin|etc|lib|sbin|usr|var)%;
            push @links, $_;
        }

@files{@links} = (1) x @links;
    }

if (keys %local_files) {
        print "warning: files in /usr/local or /var/local used:\n",
          join("\n", sort keys %local_files), "\n";
    }
    if (keys %alternatives) {
        print "warning: alternatives used:\n",
          join("\n", sort keys %alternatives), "\n";
    }

return keys %files;
}

# The purpose here is to find out all the symlinks crossed by a file access.
# We work from the end of the filename (basename) back towards the root of
# the filename (solving bug#246006 where /usr is a symlink to another
# filesystem), repeating this process until we end up with an absolute
# filename with no symlinks in it.  We return a list of all of the
# full filenames encountered.
# For example, if /usr -> /moved/usr, then
# /usr/bin/X11/xapp would yield:
# /usr/bin/X11/xapp, /usr/X11R6/bin/xapp, /moved/usr/X11R6/bin/xapp

# input: file, pwd
# output: if symlink found: (readlink-replaced file, prefix)
#         if not: (file, '')

sub NextSymlink ($) {
    my $file = shift;

my $filestart = $file;
    my $fileend   = '';

while ($filestart ne '/') {
        if (-l $filestart) {
            my $link   = readlink($filestart);
            my $parent = dirname $filestart;
            if ($link =~ m%^/%) {    # absolute symlink
                return $link . $fileend;
            }
            while ($link =~ s%^\./%%) { }
            # The following is not actually correct: if we have
            # /usr -> /moved/usr and /usr/mylib -> ../mylibdir, then
            # /usr/mylib should resolve to /moved/mylibdir, not /mylibdir
            # But if we try to take this into account, we would need to
            # use something like Cwd(), which would immediately resolve
            # /usr -> /moved/usr, losing us the opportunity of recognising
            # the filename we want.  This is a bug we'll probably have to
            # cope with.
            # One way of doing this correctly would be to have a function
            # resolvelink which would recursively resolve any initial ../ in
            # symlinks, but no more than that.  But I don't really want to
            # implement this unless it really proves to be necessary:
            # people shouldn't be having evil symlinks like that on their
            # system!!
            while ($link =~ s%^\.\./%%) { $parent = dirname $parent; }
            return $parent . '/' . $link . $fileend;
        } else {
            $fileend   = '/' . basename($filestart) . $fileend;
            $filestart = dirname($filestart);
        }
    }
    return undef;
}

# input: file, pwd
# output: list of full filenames encountered en route

sub ListSymlinks ($$) {
    my ($file, $path) = @_;

if ($file !~ m%^/%) { $file = "$path/$file"; }

my @fn = ($file);

while ($file = NextSymlink($file)) {
        push @fn, $file;
    }

return @fn;
}