Edit File: ufw
# /etc/default/ufw # # Set to yes to apply rules to support IPv6 (no means only IPv6 on loopback # accepted). You will need to 'disable' and then 'enable' the firewall for # the changes to take affect. IPV6=yes # Set the default input policy to ACCEPT, DROP, or REJECT. Please note that if # you change this you will most likely want to adjust your rules. DEFAULT_INPUT_POLICY="DROP" # Set the default output policy to ACCEPT, DROP, or REJECT. Please note that if # you change this you will most likely want to adjust your rules. DEFAULT_OUTPUT_POLICY="ACCEPT" # Set the default forward policy to ACCEPT, DROP or REJECT. Please note that # if you change this you will most likely want to adjust your rules DEFAULT_FORWARD_POLICY="DROP" # Set the default application policy to ACCEPT, DROP, REJECT or SKIP. Please # note that setting this to ACCEPT may be a security risk. See 'man ufw' for # details DEFAULT_APPLICATION_POLICY="SKIP" # By default, ufw only touches its own chains. Set this to 'yes' to have ufw # manage the built-in chains too. Warning: setting this to 'yes' will break # non-ufw managed firewall rules MANAGE_BUILTINS=no # # IPT backend # # only enable if using iptables backend IPT_SYSCTL=/etc/ufw/sysctl.conf # Extra connection tracking modules to load. IPT_MODULES should typically be # empty for new installations and modules added only as needed. See # 'CONNECTION HELPERS' from 'man ufw-framework' for details. Complete list can # be found in net/netfilter/Kconfig of your kernel source. Some common modules: # nf_conntrack_irc, nf_nat_irc: DCC (Direct Client to Client) support # nf_conntrack_netbios_ns: NetBIOS (samba) client support # nf_conntrack_pptp, nf_nat_pptp: PPTP over stateful firewall/NAT # nf_conntrack_ftp, nf_nat_ftp: active FTP support # nf_conntrack_tftp, nf_nat_tftp: TFTP support (server side) # nf_conntrack_sane: sane support IPT_MODULES=""